Product Introduction

Electrochemical copper ions sensor

ACCUSENSING M series sensor introduced key technology in processing blood glucose strip to achieve integrating three electrode system, microfluidic channel and reagents coating on single sensor. By rigorous control for uniform manufacturing process, M series sensor is able to perform ppb level analysis.

With using metal ions analyzer MAS-G1, M series sensor requires no reagents and no calibration curve establishment. The easy operating process is to eliminate human interference and sample cross-contamination to effectively obtain real-time data. 

Specification

  • Model
  • Cu-M020300
Target analyte Copper(II) ions
  • Length
  • 30 mm
  • Width
  • 12 mm
  • Microfluidic channel volume
  • 10 uL
  • Quantification range
  • 0.20-3.00 mg/L
  • Limit of detection
  • 0.05 mg/L
  • Analysis time
  • 300s (ppm level only require 65s)

Technical Information

Results of Copper Ion Monitoring in Water

The left shows the voltammogram of that Cu-M020300 detects different concentrations of copper ions (0.20-3.00 mg/L) in industrial waste water with MAS-G1.

There is an obvious peak (current signal) at -200 mV which increases with concentration increasing. The correlation analysis between current signal and copper ions concentration indicates R2>0.99, which means Cu-M020300 is able to accurately quantify the concentration of copper ions under waste water environment. 

The quantification range of Cu-M020300 is set to meet the control standard of Taiwan industrial effluent water. If you have quantification needs for lower than 0.20 mg/L or higher than 3.00 mg/L, please feel free to contact us.   

FEATURES

  • •Just dip the sensor to the sample without extra reagents
  • •No need to establish the calibration curve before analysis
  • •Reagents precoated 
  • •Only one drop of sample required
  • •Three electrode system
  • •Made of recyclable materials        

常見問題

  商品有保固期嗎?

有的，依據消費者保護法之規定，消費者享有商品到貨7天猶豫期之權益 (收到商品次日起算第一天，第7天為假日時，順延至次日。) 請注意，猶豫期非試用期。

  商品有鑑賞期嗎?

有的，依據消費者保護法之規定，消費者享有商品到貨7天猶豫期之權益 (收到商品次日起算第一天，第7天為假日時，順延至次日。) 請注意，猶豫期非試用期。

※不適用七天鑑賞期商品：個人用品 (如：口罩) 基於衛生考量，除商品本身有瑕疵、實際出貨與訂單不符可退換貨外，一經拆封、使用或消費者造成之外盒、產品變形，恕不接受退換貨。 退回商品須保持全新狀態 (需保持商品、包裝、贈品、附件、發票、保固卡之完整性)，否則恕不接受退貨。

  商品有鑑賞期嗎?

有的，依據消費者保護法之規定，消費者享有商品到貨7天猶豫期之權益 (收到商品次日起算第一天，第7天為假日時，順延至次日。) 請注意，猶豫期非試用期。

※不適用七天鑑賞期商品：個人用品 (如：口罩) 基於衛生考量，除商品本身有瑕疵、實際出貨與訂單不符可退換貨外，一經拆封、使用或消費者造成之外盒、產品變形，恕不接受退換貨。 退回商品須保持全新狀態 (需保持商品、包裝、贈品、附件、發票、保固卡之完整性)，否則恕不接受退貨。

COPYRIGHT © 2019 ACCUSENSING Technology Co., LTD, ALL RIGHTS RESERVED.